Water hammer is normally generated from a particular lot where any open tap (dishwasher, washing machine, toilet isolation taps or water isolation valve) washer bounces in the body of the tap causing the hammering sound when a mixer tap is turned off too quick or where a washing machine or dishwasher turns off which contain solenoid valves that instantly shut the water off.
Works required by each lot can be completed by 1 of the 2 below methods.
Replace any taps mentioned above with new style ¼ or ½ turn taps that contain ceramic discs and don’t contain conventional washers that can cause water hammer.
This can be extremely time consuming to determine what fixture or fixtures are at fault and what unit, or units are the issue.
Attached are photos showing the 2 different styles of taps and also show a tap washer being “Pinned” so it holds firm in the end of the tap spindle.
Service the above-mentioned taps and “Pin” the washers so they have to be forced into the end of the tap spindle.
This is carried out by pinching the stem of the tap washer so it has to be pushed into the end of the tap spindle to allow the washer to be firm in the end of the tap and stop any movement that causes water hammer.